Characterization,mechanical, and antibacterial properties of nanofibers derived from olive leaf,fumitory, and terebinth extracts

In this study, nanofiber structures were obtained with convenient polymers (PVA [polyvinyl alcohol] and PCL [poly ^o-caprolactone]) derived from the herbal extracts of olive leaves, fumitory, and terebinth plants. Optimum nanofiber structures were identified by measuring viscosity and conductivity values and performing morphological analysis, characterization, and mechanical tests of the prepared solutions. The potential use for wound healing at the most efficient level was determined as a result of antibacterial analysis of the structures obtained. APT (PVA/terebinth) and BFO (PCL/fumitory) nanofibers had the thinnest diameter range and the highest strength values. In terms of the determination of antibacterial effects, nanofiber structures of all 3 plant species proved to be effective against bacteria. The greatest effect was observed against Escherichia coli in the nanofiber structure containing olive leaves, with a zone diameter of 32 mm. In addition, APT and BFO nanofibers had the highest values of thinness and strength. In these 2 samples, using BFO against Staphylococcus aureus and APT against Candida albicans increased their areas of activity. In the literature review, no study was available about obtaining nanofibers, especially from fumitory and terebinth plants. This study aimed to increase knowledge on obtaining nanofiber structures, including various polymers derived from olive leaves, fumitory, and terebinth plants.     

The use of water-soluble phthalocyanines as textile dyes in nylon/elastane fabric: fastness and antibacterial effectiveness

This work reports on dyeing of nylon/elastane fabric with water-soluble phthalocyanines ( 1-4 ) bearing quinoline 5-sulfonic acid substituents on the peripheral or nonperipheral positions and determining the antibacterial efficiency of the phthalocyanine compounds and the dyed nylon/elastane fabrics. The light, washing, water, perspiration, and rubbing fastness properties of nylon/elastane fabrics dyed with phthalocyanines were also determined. The results showed that all dyed fabrics showed very good wet fastness values. The lightfastness value of the nylon/elastane fabric dyed with phthalocyanine dye ( 1 ) showed a much better value than the others. Also, the antibacterial efficiencies of the dyed nylon fabrics and the dye compounds were investigated against a gram-negative ( Escherichia coli ) and a grampositive ( Staphylococcus aureus ) bacteria by using disc diffusion method. The results showed that the dyed nylon/elastane fabrics and the compounds exhibited antibacterial activities against both bacteria.     

Chemical composition,antimicrobial, and lipase enzyme activity of essential oil and solvent extracts from Serapias orientalis subsp. orientalis

The volatile components of essential oil (EO), SPME, and SPME of solvent extracts ( n -hexane, methanol, and water) obtained from fresh Serapias orientalis subsp. orientalis ( Soo ) were analyzed by GC-FID/MS. EO of Soo gave 11 compounds in the percentage of 99.97%; capronaldehyde (37.01%), 2-( E )-hexenal (23.19%), and n -nonanal (19.05%) were found to be major constituents. SPME GC-FID/MS analyses of fresh plant and solvent extracts of Soo revealed 7, 12, 7, and 4 compounds within the range of 99.7% to 99.9%. Limonene (76.5%, 41.7%, and 61.3%) was the major compound in SPMEs of the n -hexane and methanol extracts. α -Methoxy- p -cresol (52.9%) was the main component in its water extract. The antimicrobial activity of EO and the solvent extracts of Soo were screened against 9microorganisms. EO showed the best activity against Mycobacterium smegmatis , with 79.5 µg/mL MIC value. The n -hexane, methanol, and water extracts were the most active against the Staphylococcus aureus within the range of 81.25–125.0 µg/mL (MIC). IC ₅₀ values for the lipase enzyme inhibitory activity of EO and solvent extracts ( n -hexane, methanol, and water) were determined to be 59.87 µg/mL, 64.03 µg/mL, 101.91 µg/mL, and 121.24 µg/mL, respectively.     

Controllable Synthesis of Porphyrin‐Based 2D Lanthanide Metal–Organic Frameworks with Thickness‐ and Metal‐Node‐Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin‐based 2D lanthanide MOFs (Ln‐TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4‐carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as‐prepared 2D Ln‐TCPP nanosheets showed thickness‐dependent photocatalytic performances towards photooxidation of 1,5‐dihydroxynaphthalene (1,5‐DHN) to synthesize juglone. Particularly, the Yb‐TCPP displayed outstanding photodynamic activity to generate O₂^? and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.     

Iron‐Catalyzed Highly Enantioselective cis‐Dihydroxylation of Trisubstituted Alkenes with Aqueous H2O2

Reliable methods for enantioselective cis‐dihydroxylation of trisubstituted alkenes are scarce. The iron(II) complex cis‐α‐[Fe^II(2‐Me₂‐BQPN)(OTf)₂], which bears a tetradentate N₄ ligand (Me₂‐BQPN=(R,R)‐N,N′‐dimethyl‐N,N′‐bis(2‐methylquinolin‐8‐yl)‐1,2‐diphenylethane‐1,2‐diamine), was prepared and characterized. With this complex as the catalyst, a broad range of trisubstituted electron‐deficient alkenes were efficiently oxidized to chiral cis‐diols in yields of up to 98 % and up to 99.9 % ee when using hydrogen peroxide (H₂O₂) as oxidant under mild conditions. Experimental studies (including ¹⁸O‐labeling, ESI‐MS, NMR, EPR, and UV/Vis analyses) and DFT calculations were performed to gain mechanistic insight, which suggested possible involvement of a chiral cis‐Fe^V(O)₂ reaction intermediate as an active oxidant. This cis‐[Fe^II(chiral N₄ ligand)]²⁺/H₂O₂ method could be a viable green alternative/complement to the existing OsO₄‐based methods for asymmetric alkene dihydroxylation reactions.     

Systematic Research and Evaluation Models of Nanomotors for Cancer Combined Therapy

Limited tumor permeability of therapeutic agents is a great challenge faced by current cancer therapy methods. Herein, a kind of near infrared light (NIR)‐driven nanomotor with autonomous movement, targeted ability, hierarchical porous structure, multi‐drugs for cancer chemo/photothermal therapy is designed, prepared and characterized. Further, we establish a method to study the interaction between nanomotors and cells, along with their tumor permeability mechanism, including 2D cellular models, 3D multicellular tumor spheroids and in vivo models. In vivo tumor elimination results verify that the movement behaviour of the nanomotors can greatly facilitate them to eliminate tumor through multiple therapeutic methods. This work tries to establish systematic research and evaluation models, providing strategies to understand the relationship between motion behaviour and tumor permeation efficiency of nanomotors in depth.     

Maximization of Spatial Charge Density: An Approach to Ultrahigh Energy Density of Capacitive Charge Storage

Capacitive energy storage has advantages of high power density, long lifespan, and good safety, but is restricted by low energy density. Inspired by the charge storage mechanism of batteries, a spatial charge density (SCD) maximization strategy is developed to compensate this shortage by densely and neatly packing ionic charges in capacitive materials. A record high SCD (ca. 550 C cm^?3) was achieved by balancing the valance and size of charge‐carrier ions and matching the ion sizes with the pore structure of electrode materials, nearly five times higher than those of conventional ones (ca. 120 C cm^?3). The maximization of SCD was confirmed by Monte Carlo calculations, molecular dynamics simulations, and in situ electrochemical Raman spectroscopy. A full‐cell supercapacitor was further constructed; it delivers an ultrahigh energy density of 165 Wh L^?1 at a power density of 150 WL^?1 and retains 120 Wh L^?1 even at 36 kW L^?1, opening a pathway towards high‐energy‐density capacitive energy storage.     

Antimicrobial tunicamycin derivatives from the deep sea-derived Streptomyces xinghaiensis SCSIO S15077

Abstract

Tunicamycin E (1), featuring a methyl substitution at C-10′, was isolated from marine-derived Streptomyces xinghaiensis SCSIO S15077 originated from the South China Sea sediment together with six known compounds, tunicamycin B (2), tunicamycin X (3), tunicamycin A (4), streptovirudin D₂ (5), tunicamycin C (6), and tunicamycin C₃ (7). The structure of compound 1 was elucidated by detailed spectroscopic data analyses. All the compounds exhibited strong to moderate antibacterial activity against Gram-positive bacteria Bacillus thuringiensis BT01 and B. thuringiensis W102 with MIC values ranging from 0.008 to 2 μg/mL. Moreover, compounds 1–7 exhibited moderate antifungal activity against Candida albicans ATCC 96901 and C. albicans CMCC (F) 98001 with MIC values ranging from 2 to 32 μg/mL. This is the first report that tunicamycins exhibit antimicrobial activities against B. thuringiensis, C. albicans CMCC (F) 98001 and a fluconazole resistant strain C. albicans ATCC 96901.     

Rapid measurements of curcumin from complex samples coupled with magnetic biocompatibility molecularly imprinted polymer using electrochemical detection

Curcumin widely exists in food, and rapid selective and accurate detection of curcumin have great significance in chemical industry. In this experiment, a new magnetic biocompatibility molecularly imprinted polymer was prepared with nontoxic and biocompatible Zein to adsorb curcumin selectively. The polymer has high biocompatibility, good adsorption capacity, and specific adsorption for curcumin. Combined with portable electrochemical workstations, the polymer can be used to detect curcumin rapidly and cost‐effectively. Using curcumin as a template and Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe₃O₄ particles for solid phase extraction. The experimental results showed that the polymer reached large adsorption capacity (32.12 mg/g) with fast kinetics (20 min). The adsorption characteristic of the polymer followed the Langmuir isotherm and pseudo‐second‐order kinetic models. Hexacyanoferrate was used as electrochemical probe to generate signals, and the linear range was 5–200 µg/mL for measuring curcumin. The experimental analysis showed that the polymer was an ideal material for selective accumulation of curcumin from complex samples. This approach has been successfully applied to the determination of curcumin in food samples with electrochemical detection, indicating that this is a feasible and practical technique.     

爆炸载荷下脆性颗粒体系破碎特性的数值研究

试验发现,以球形TNT为中心爆源,球形玻璃珠构成的颗粒和球壳中发生破碎的颗粒体积分数随当量比(颗粒球壳的质量与TNT炸药的质量比)的增加呈现指数衰减规律。采用有限元与离散元耦合的连续非连续数值方法,揭示了中心炸药起爆后颗粒环壳内爆炸波的传播衰减和在环壳外界面反射后的稀疏卸载过程。由于爆炸波的短脉冲特性,颗粒内部应力场始终处于应力非均衡状态,采用应力均衡状态下颗粒破碎强度的Weibull分布会得到远高于试验测得的破碎颗粒体积分数。因此采用破坏波传播特征时间内的平均诱导应力而非瞬时诱导应力作为颗粒破碎强度的应力指标,并通过试验结果确定破坏波传播特征时间。考虑了应力传播的非均匀性对于颗粒破碎的影响,得到了平均诱导应力峰值的概率分布随比例距离的变化规律,结合修正后的颗粒破碎强度Weibull分布建立了破碎颗粒体积分数随比例距离的变化模型。